Skip to content
Stackline

Device Monitoring

Infrastructure & Device Monitoring

UPS units, server rooms, meters and industrial equipment are checked around the clock, and the alerts that matter reach the person who can act in time.

See capabilitiesDiscuss your project
Conceptual architecture · illustrative, no real data

Is this for you?

An alarm that lands in a shared inbox is easy to miss. Too often, the team hears about the problem only after systems are already down.

  • Device alarms arrive by email and get lost
  • Readings are collected by walking round with a notebook
  • Every vendor has its own monitoring tool
  • There's no history to check what happened before an incident

Typically for

  • IT managers

    Responsible for server rooms and UPS units

  • Facility managers

    Looking after HVAC, generators and cooling

  • Operations managers

    Who need capacity and inspection data

  • Teams

    Relying on manual rounds or scattered inspection notes

How it works

We check which interfaces your devices offer and what your network allows, then set up collection that feeds dashboards, alerts and reports.

  1. Your systems

    • UPS units & PDUs
    • Sensors & meters
    • Email-only devices

  2. Stackline software

    • SNMP polling & traps
    • Modbus collection
    • Normalise & check limits

  3. Where the data goes

    • Alerts: Telegram, SMS, email
    • History database
    • Scheduled reports
Conceptual architecture · illustrative, no real data

What you get and what we need

What you get

  • Readings collected over SNMP, Modbus or email
  • Limits and alerts routed to named people and channels
  • A history database with a monitoring dashboard
  • Scheduled reports and a written description of the setup

What we need from you

  • A list of devices with make, model and location
  • The interfaces they support: SNMP, Modbus or email alerts
  • Who receives alerts, and through which channel
  • Network access, or a place to run a local gateway

Device Monitoring capabilities

Each part works on its own or as part of a larger project.

Common questions

About Device Monitoring projects.

Yes. We combine SNMP polling and traps with room sensors, so the person on duty is alerted as soon as load, battery or temperature passes a set limit.

Modbus is an industrial protocol used by energy meters, generators, PLCs, HVAC systems and temperature controllers. Modbus integration means reading their register values automatically, storing them with history and using them for alerts and reports.

Yes. We read those emails from a dedicated mailbox, merge duplicates and turn each one into a structured event for your alert channel or ticketing system.

Not for collecting data. The collector runs on your network; an outside connection is needed only when alerts go to external channels such as Telegram, SMS or email, and then only those messages leave.

UPS units, PDUs, switches, environmental sensors, meters, generators, PLCs and HVAC controllers: anything that speaks SNMP or Modbus, or can send an email alert. We check each model before work starts.

You set the limits, recipients and channels. Alerts go by email, Telegram, SMS or another channel you choose, and move to a second contact if nobody responds.

Yes. Every reading is stored, so you can look back at what happened in the hours before an incident.

Have a similar task?

Send a short note about the equipment and software you use and what should change. We'll answer with questions or a first step.

Discuss your project